18 Years Factory Glass Coated Steel Tanks - Fusion Bonded Epoxy Coated Steel Tank – YHR
18 Years Factory Glass Coated Steel Tanks - Fusion Bonded Epoxy Coated Steel Tank – YHR Detail:
Fusion Bonded Epoxy Coated Tank
Fusion Bonded Epoxy (FBE) is an electrostatically applied coating system with superior coverage and uniform coating thickness. Epoxy coating is the economical solution that ensures high performance corrosion resistance for storage tanks. All epoxy coated panels are finished in YHR’s ISO 9001 certified factory before delivered to the clients.
Product Paramenters
Application | Test | Result |
Dry Film Thickness | Non-Destructive Test | 5- 10 mils / 150-250 microns interior4-9 mils/ 100-230 microns exterior |
Hot water immersion 90 days, 70°C | AWWA C550-05 | Pass |
Adhesion after 7 days,90°C water | ISO 4624 | ≥16MPa |
Corrosion Resistance | Salt Spray ISO 9227 / ASTM B117 | Meets or exceeds industry norms |
Impact Resistance | ASTM G14 3.2mm (1⁄8 in) steel plate | > 18 Joule |
PH range | - | 3-13 |
Abrasion Resistance | Abrasion wheel ASTM 4060 | CS-17, 1000g, 1000 cycles <40mg |
Hardness | ISO 15184 / ASTM D3363 | 2H |
Chemical Immersion | 50% NaOH, 50% H2SO4 | 2 years no change |
Holiday test | 1100v every panel | Discontinuity free (zero defects at test voltage) |
Production Procedure
The coating production line is mainly composed of pre-treatment system, dehydration drying tunnel, electrostatic spraying system, powder recovery system, powder curing drying tunnel, chain drive system and electric control system. The entire workpiece conveying system of the coating production line adopts a mechanized conveying method suspended in the air, which runs smoothly, quickly and conveniently. It adopts PLC controllable programming and is programmed and controlled according to the actual requirements of the production process.
(1) Hanging → (2) Degrease and Rust Removal → (3) Degrease→ (4) 1st wash→ (5) 2nd wash→ (6) Silicohydride treatment→ (7) 3rd wash→ (8) Dry→ (9) Base coat- epoxy coating→ (10) Base coat cured→ (11) Top coat-polyester coating→ (12) Top coat cured→ (13) Cool down and take off
Applications
1. Municipal Wastewater
2. Industrial Wastewater
3. Potable Water
4. Fire Protection Water
5. Biogas Digester
6. Slurry Storage
7. Sludge Storage
8. Liquid Leachate
9. Dry Bulk Storage
Advantages
1. Excellent anti-corrosion performance
2. Flexibility, superior impact-resistance
3. 100% coating coverage on panel edges and holes
4. Fast installation with better quality: design, production and quality control in factory
5. Safe, skill-free: less working aloft, no need for long time worker training
6. Less influenced by local weather
7. Long life time
8. Low maintenance cost and easy to repair
9. Possible to relocate, expand and reuse
10. Beautiful appearance
Pictures
Product detail pictures:
Related Product Guide:
18 Years Factory Glass Coated Steel Tanks - Fusion Bonded Epoxy Coated Steel Tank – YHR , The product will supply to all over the world, such as: , , ,
By from -
By from -